Handy Tips For Mold Removal From Ducts
Molds can be the most irritating thing you see in your ducts. They are prone to thrive more in humid places with a constant flow of air and dust. The molds establish colonies in your duct system and degrade the complete look of your clean ducts and HVAC system.
Consequently, you may observe a great reduction in air quality and efficiency of your HVAC system. If left ignored and uncleaned for a long time, it may lead to malfunctioning of your heating and cooling device.
Here in this article, you will be provided with a handful of tips to get rid of molds from air ducts.
Starting up with some homemade solutions to remove the mold
If you are not sure of the chemical solutions to remove molds, you can start up by using some homemade ingredients. You can hire professional duct cleaning Melbourne to get rid of molds from air ducts.
Make a Solution of-
Half tablespoon of baking soda/ you can use bleach without detergent
One tablespoon of cloth detergent
One cup of water
When you are done preparing the solution, apply it to the mold growth locations. Keep yourself safe from the mold and the solution you are using by wearing face masks and goggles. Keep proper ventilation in the room during the procedure as bleaching gives off some smoke and tingling odor in the air.
Similarly, you can choose some commercial products from the market after consulting a professional.
Otherwise, if the infestation is not so stubborn, you can pull it off by scrubbing the mold area. So, Dispose of the rags used in scrubbing in air-tight trash bags to prevent dispersion of spores in the air.
Using other methods to get rid of the mold infestation
Sometimes the mold infestations are so stubborn that home remedies do not help much. So, In case you have dealt with the problem of mold growth frequently in the past, you should consider the following tips.
Tip 1: Replace the HVAC air filters with new ones. You should install a replaceable or use and throw air filter. So, You can also try insulating the air ducts which is going to reduce the amount of condensation of water in it.
Tip 2: Molds grow mostly in moist areas. So, Your drip pan can be the source of it. duct cleaning services is very important to prevent mold infestation.
Tip 3: Keep an eye for minor leaks in your duct system. You can go for use of sealants in the leaking areas only when other methods are not viable. Leaking makes the duct moist and congenial for mold growth.
Tip 4: You can alternatively install a dehumidifier in the mold growth location. This will maintain the humidity of that area.
Tip 5: If all the above methods don’t work, you need to call the professionals. An annual checkup of air ducts is good for maintenance.
The worst condition is you have to replace the complete device with a new one. So if you are not interested in disturbing your house's indoor environment with a musty odor and mold infestations, follow the above tips for best results.